Sony KV-27FA210 Instructions: TV stand (primary manual) Operating Instructions Manual page 22

Operating Instructions
TV and Cable Box
1
From cable/
antenna
1
Connect the coaxial cable from your cable service to the IN jack on your cable box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the
VHF/UHF jack on your TV.
Using your TV with this connection
This connection allows you to do the following:
❏
Program your Sony remote control to operate your cable box (see page 5).
❏
To activate your remote press
buttons or CH+/- buttons to change the channels. To do this, first program your remote
control, then use the Channel Fix feature to set your TV to channel 3 or 4 (see page 29).
14
Cable box
2
to operate your cable box and then use the
Rear of TV
1 3 4
S VIDEO
P
P
VIDEO
L
(MONO)
R
0 9