Using The Timer Menu - Sony KV-27FA210 Instructions: TV stand (primary manual) Operating Instructions Manual

Using the Timer
To access the Timer menu, use the following steps:
To Display To Highlight
Set your TV to the current day and time. Press
Current Time
menu:
1
2
✍
You must set the Current Time before you can use Timer 1 or Timer 2.
Use the timers to program your TV to turn on and off by day, time, duration, and
Timer 1 and
channel. The timer duration is a maximum of six hours. When the channel is
Timer 2
Scheduled fixed, it is not necessary to set the channel.
viewing
1
2
3
✍
Select Off to turn off the Timer. Your previous settings will be saved.
✍
When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of
any loss of power, Current Time, Timer 1, and Timer 2 settings will be cleared.
Menu
To Select
Use the F or f buttons to enter the correct day and time, then press
Press to exit the menu.
Use the F or f buttons to highlight Timer 1 or Timer 2 , then press
Use the F or f buttons to enter the desired day, start time, duration, and
channel, then press
has been set, and the timer light on the front panel of the TV should be on.
Press to exit the menu.
Video
Timer 1 : Set
Timer 2 : Set
Current Time
Program the time
Move:
to open the Current Time
. The timer status should be On when the Timer
Using the Menus
Audio Channel Parent Timer Setup
Program
:
End:
Select:
.
Basic
AM
.
37