Page 1
Digital Remote Wheels DRW-1 SUP2.2 USER MANUAL Date 01.08.2019 ...
Page 2
In no event shall ARRI or its subsidiaries be liable for or have a remedy for recovery of any special, direct, indirect, incidental, or consequential damages, including, but not limited to lost profits, lost savings, lost revenues or economic loss of any kind or for any claim by a third party, downtime, ...
Warning The DRW-1 in combination with the SRH-3 stabilized remote head and related products should only be used by experienced and trained operators. This product is not designed for inexperienced users and should not and must not be ...
DRW-1 Setup Mounting the DRW-1 base The bottom of the DRW-1 mounting base offers multiple mounting options: 3/8” threads for long camera dovetail plates, like the O’Connor plate (08283), Euro style quick release plate (2575-120), Sachtler sideload plate M (1164),...
Page 7
The bottom of the remote control offers four M6 threads. Open the clamp lever of the remote mounting bracket, remove the bracket from the rods of the DRW-1 mounting base. Place the DRW-1 SRH remote mounting bracket to the bottom of the remote control.
For operation, always use a power source as indicated in the instructions. Always unplug the cable by gripping the plug, not the cable. Never try to repair. All repair work should be done by a qualified ARRI Service Center. Never remove or deactivate any safety equipment (incl. warning stickers or paint marked screws).
Fluid Drag Ring (friction) Softer The DRW-1 wheels are equipped with a fluid drag ring, which allows friction to be adjusted. This unique feature allows the operator to control the accuracy of the head through a mechanical friction ...
The Auto Assignment function can be deactivated in the settings for the remote control. Selecting the Mode There are two ways to use the DRW-1: Angle Mode (preset) and Speed Mode. Angle Mode the right choice when ...
Page 11
Remote Control Setup Speed setup in Angle Mode NOTE In order to operate the DRW-1 correctly in Angle Mode, the following settings shall be made: • Speed • SENSITIVITY set to 0 • DEADBAND set to 0 •...
8.6 Ratio (Angle Mode) Because the ARRI DRW-1 wheels are the digital version of the ARRI Geared Head 2, the DRW-1 wheels also offer the classic 3-speed drive with the original gear ratio. NOTE Once the DRW-1 wheels are connected to the remote control, the Ratio value ...
Page 13
Additional Setups Assigning the DRW-1 NOTE The DRW-1 shall be assigned to the corresponding axes of the remote head. For a fast selection, the home screen of the remote control offers a short cut. Assign Pan Setpoint Selecting the indicated area below the single ...
Page 14
Additional low pass filter function for encoder based controllers, like the DRW-1. When the DRW-1 is used in a car or a train, vibrations of the vehicle may be transmitted to the DRW-1's encoders. This can lead to irritations in the pan and tilt axis. ...
DRW-1, Two Wheels Set KK.0021212 contains 2 x DRW-1 Module K2.0019319 2 x Hand Wheel complete 50 N2.25004.A 1 x DRW-1 Mounting Base K2.0019325 1 x Cable LBUS 0.3m/1ft K2.0006750 1 x Cable LBUS 0.5m/1.5ft K2.0006751 1 x DRW-1 Foam Set 90.0020791...
Product Description: Camera Stabilizer System: • ARRI Stabilized Remote Head SRH-3 Pro Set including ARRI Stabilized Remote Head – SRH-3 and ARRI Remote Remote control – Remote control-1 + Europe Setting for Software 01.14.00 or later and Antenna Proant 333 Ex-It 2400 Foldable, Accessories...
Page 17
Nr. / No. TR-25880-43304-01 (Edition 01) Prüfbericht / Test Report Auftraggeber FoMa Systems GmbH Applicant Geräteart Digital Remote Wheel Type of equipment Typenbezeichnung DRW-1 Type designation Seriennummer / Prototype Serial number Auftragsnummer / Order No. Prüfgrundlage EN 55032:2012 (KN32) Test standards...
Page 18
International Declarations TÜV SÜD Product Service GmbH Phone: +49 9421 5522-0 Äußere Frühlingstraße 45 Fax: +49 9421 5522-99 94315 Straubing Web: www.tuev-sued.de Germany Summary Auftragsnummer / Order No. Prüfergebnisse / Test Results Die Prüfungen wurden nach folgenden Vorschriften durchgeführt: Tests were performed according to: EN 55032:2012 (KN32);...
Page 19
International Declarations Report on the FCC and IC Testing of the FoMa Systems GmbH Digital Remote Wheel. Model: DRW-1 In accordance with FCC 47 CFR Part 15B and ICES-003 Prepared for: FoMa Systems GmbH Oskar-Sembach-Ring 11 91207 Lauf - Germany...
Page 20
International Declarations DRW-1 Module, K2.0019319DRW-1 Module, K2.0019319Digital Remote WheelDigital Remote WheelArnold & Richter Cine Technik GmbH & Co Betriebs KGArnold & Richter Cine Technik GmbH & Co Betriebs KG December 12, 2018 Page 1 of 34 Nr. / No. TR-80986-44626-01(Edition 1) Prüfbericht / Test Report...
Page 21
CCA Test Certificate issued by an NCB in accordance with CCA Digital Encoder Head Test item description ......: Manufacturer ........: ARRI Cine + Video Geräte GmbH Pottendorferstraße 23-25 3/1/1, A-1120 Wien DEH-1, K2.0022594 Model/Type reference ....... : Ratings ..........: External power supply 12 V DC max.
Page 22
International Declarations TÜV SÜD Product Service GmbH Phone: +49 9421 5522-0 Äußere Frühlingstraße 45 Fax: +49 9421 5522-99 94315 Straubing Web: www.tuev-sued.de Germany Testing procedure and testing location: Testing Laboratory: TÜV SÜD Product Service GmbH Testing location/ address ....... : Äußere Frühlingstr.
Page 23
Kamerastabilisierungssystem / Camera Stabilizer System: • ARRI Stabilized Remote Head SRH-3 Pro Set including ARRI Stabilized Remote Head – SRH-3 and ARRI Remote Control Panel – RCP-1 + Europa Setting der Software 01.14.00 oder höher und Antenne Proant 333 Ex-IT 2400, Zubehör gemäß...