DuraTrel 11180 Assembly Instructions

4 x 4' two board planter bed

Advertisement

General Information

PLEASE READ THROUGH BEFORE BEGINNING ASSEMBLY.
IMPORTANT: Check boxes for Contents Listed
Check inside of parts as some parts are packaged
inside of others
In the event of missing, damaged or defective parts
please call our customer service dept. at 1-877-258-6020
When assembling components, place on a clean, flat
non-abrasive surface to avoid scratches

Tools Required

... Battery or Electric Drill with #2 phillips bit
... Tape Measure
... Hammer or Rubber Mallet (recommended)
... Shovel or Post Hole Digger (recommended)
... PVC, Super, or Crazy Glue
4 x 4' Two Board Planter Bed
11180
Model#
Part #
1
4" sq. x 19" Corner Post
2
1½ x 5½ x 48" Rail
3
1½ x 5½ x 45" Rail
4
4" sq." Flat Cap
5
Hardware Bag
2" Painted Screw
150 Birch Road
P.O. Box 122
Sheboygan Falls, WI 53085
Assembly Instructions
Qty
Description
(includes:)
1
1-877-258-6020
www.dura-trel.com
sales@dura-trel.com
4
4
4
4
1
32

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 11180 and is the answer not in the manual?

Questions and answers

Summary of Contents for DuraTrel 11180

  • Page 1 4 x 4' Two Board Planter Bed 11180 Model# Assembly Instructions Part # Description 4" sq. x 19" Corner Post 1½ x 5½ x 48" Rail 1½ x 5½ x 45" Rail 4" sq." Flat Cap Hardware Bag (includes:) 2" Painted Screw General Information PLEASE READ THROUGH BEFORE BEGINNING ASSEMBLY.
  • Page 2 Warranty Statement 20 Year Guarantee Please call manufacturer direct with questions concerning missing or defective parts at Toll Free: 877- 258-6020. Dura-trel, Inc. products are warranted to be free from manufacturing defects resulting in delaminating, peeling, flaking, corroding, cracking, crazing, or extreme amounts of fading or bleaching causing the PVC to change to its natural color for a period of 20 years from the date of purchase.
  • Page 3 Insert ends of two 1 ½" x 5 ½" x 48" rails(part 2) into two 4"x 4"x 19" corner posts (part 1). Using 2" screws, screw together planter bed side. Be sure all parts are fully inserted into posts before securing.

Table of Contents