Hooking Up The Turntable - Sony PS-J20 Operating Instructions Manual

Hooking up the Turntable

The phono cables and earth lead come attached to the
rear of the cabinet.
1
Connect the cable with the red plug to the right
PHONO IN R input jack on the amplifier and
connect the cable with the white plug to the left
PHONO IN L input jack.
L
R
2
Set MM.AMP. on the bottom panel according to
the amplifier connection as follows:
For connection to
PHONO IN jacks
AUX IN or LINE IN jacks
Mains lead hookups
Connect the mains lead to an AC wall outlet after
completing all of the previous connections.
Note
Install this system so that the power cord can be
unplugged from the wall socket immediately in the
event of trouble.
Amplifier
PHONO
IN
Set MM.AMP. to
OFF
ON
to a wall outlet
Getting Started
5