Selecting Signals Output To The Auxiliary Bus - Sony DFS-700 Operating Instructions Manual

Selecting Images

Selecting Signals Output to the Auxiliary Bus

3-16
Chapter 3 Basic Operation
Delegation buttons
TITLE DSK EDGE
1 2
EDITOR LUM LUM LUM TRAIL
SHADOW
GPI CRK CRK BORDER BEVELD
EDGE
SET UP MASK MASK MASK SOFT
SHIFT CCR LIGHTING MATTES BORDER
CCR TITLE 1 TITLE 2
SOURCE SOURCE
AUXILIARY
BLACK 1 2 3 4
BACKGROUND
1 2 3 4
BLACK
FOREGROUND
BLACK 1 2 3 4
AUXILIARY buttons
To select the signal to be output to the auxiliary bus, press the desired
AUXILIARY button (BLACK, 1 to 8, MEMORY, or INT VIDEO),
turning it on.
To specify the function for which the selected signal is used, press one of
the delegation buttons, turning it on.
CCR button: use for color correction.
TITLE 1 SOURCE button: use as the key source signal for title key 1.
TITLE 2 SOURCE button: use as the key source signal for title key 2.
DSK FILL button: use as key fill for the downstream keyer.
SUPER BG button: use as background for 3D effects, two-channel
DME effects and so on.
FRGD 2 button: use as the second foreground channel for 3D effects,
two-channel DME effects and so on.
MEMORY button: capture in frame memory.
USER PGM
STATUS EDIT
INITIAL EDIT
PATTERN PAGE F1 F2 F3 F4 F5
ADJ
EFFECT
DSK
TRANS RATE PATTERN NUMBER
FTB
SET
DSK SUPER BG FRGD 2 MEMORY FRAME FREEZ MIX EFFECT
FILL
5 6 7 8 MEMORY INT TITLE
VIDEO
INT
5 6 7 8 CUT
MEMORY
VIDEO
AUTO
INT
5 6 7 8 MEMORY
VIDEO TRANS
SNAP SHOT
LEARN
RECALL
LOCATION
HOLD
INPUT
SET
N/R REV DIRECT DIRECT DSK PVW
RECALL PATTERN
LAST X FADE
TO
7 8 9
INS BLACK
4 5 6
DEL
P IN P
DSK
1 2 3
RST
DOWN UP ENTER
0
PATTERN/KEY PAD