Setting Of The Adjust 2 Menu; Adjustment Of Nd Filter Position - Hitachi SK-HD1300-S3 Service Manual

4 - 3． Setting of the ADJUST 2 menu
■ＡＤＪＵＳＴ ２ ：＜＞
ＮＤ ＦＩＬＴＥＲ １： ０
ＮＤ ＦＩＬＴＥＲ ２： ０
ＮＤ ＦＩＬＴＥＲ ３： ０
ＮＤ ＦＩＬＴＥＲ ４： ０
No. Item
ND FILTER1
１
ND FILTER2
ND FILTER3
ND FILTER4
Item
ND FILTER 1
ND FILTER 2
ND FILTER 3
ND FILTER 4
This adjustment is not required unless the filter is out of the fixed
position, which causes mechanical vignetting on the display. (Initial
setting is recommended)
Remove the lens from the camera head.
Turn the ND FILTER and make sure the boundary between filters
must be stopped at less vertical than 45 degrees (see the figure
below).
Adjust each filter to be stopped at the center position.
OK
NG
Filter
Initial Setting value
setting
0 -5～5
0 -5～5
0 -5～5
0 -5～5

Adjustment of ND Filter position

Procedure
Filter
Filter
Operation
Position setting of ND FILTER1
Position setting of ND FILTER2
Position setting of ND FILTER3
Position setting of ND FILTER4
4-9