Adjustment & Comfirmation On The Adjust Mode; Operation Of The Adjust Mode; How To Get Into The Adjust Mode; How To Change A Page Of The Adjust Menu - Hitachi SK-HD1300-S3 Service Manual

4．Adjustment & comfirmation on the ADJUST mode
4 - 1．Operation of the ADJUST mode

How to get into the ADJUST mode

①Hold the jog/dial knob, then push the MENU
button and ECC button for 2 seconds
simultaneously until the figure on the light is
displayed on VF and Pix monitor.
②Let go of the buttons and push the MENU
button again.
③The ADJUST1 menu is displayed.
How to get out of the ADJUST mode
①Push the MENU button to make the ADJUST
menu disappear.
②Push the ECC button.
③The ADJUST mode is closed when the figure
on the light is displayed on VF and Pix monitor.

How to change a page of the ADJUST menu

Position the cursor to the top of the page and push the jog/dial knob, then the cursor
shown.
Turn the jog/dial knob counterclockwise to select a page.
Push the MENU button to make the characters appear and disappear on the display.
is
4-5