Service/Repair; Notes On Disposal - WEBTEC HPM Manual

Notes on safety/product selection
Mounting
Please abide by the instructions and observe the correct tight-
ening torques for the fittings or adapters being utilised.
Connector thread:
1.5

Service/repair

For repairs to or calibration of the measurement instruments, please
contact a Webtec sales branch.
1.6 Notes on disposal
Recycling in compliance with WEEE
Purchasing our product gives you the opportunity to return the device to
Webtec at the end of its life cycle.
The EU Directive 2002/96 EC (WEEE) regulates the return and
recycling of waste electrical and electronics equipment.
As of 13/8/2005 manufacturers of electrical and electronics
equipment in the B2B (business-to-business) category are
obliged to take back and recycle WEEE free of charge sold after this
date. After that date, electrical equipment must not be disposed of
through the 'normal' waste disposal channels. Electrical equipment must
be disposed of and recycled separately. All devices that fall under the
directive must feature this logo:
Can we be of assistance?
Webtec offers you the option of returning your old device to us at no ex-
tra charge. Webtec will then professionally recycle and dispose of your
device in accordance with the applicable law.
74
½" BSP = 90 Nm
¼" BSP = 30 Nm
V2.0/02.11