Setting The Units (Set-Unit); Auto Power Off (Set-Auto Power); Setting Auxiliary Sensors (Set-Aux. Sensor) - WEBTEC HPM Manual

Device settings (SET)
6.1 Setting the units (SET-UNIT)
MEM
6.2 Auto power off (SET-AUTO POWER)
6.3 Setting auxiliary sensors (SET-AUX. SENSOR)
► Further information is available in the chapter 'Connecting auxiliary
sensors'.
96
Available for selection:
PRESSURE:
TEMPERATURE: °C, °F
FLOW:
POWER:
Available for selection:
AUTO POWER: OFF, ON
bar, mbar, psi, MPa, kPa
L/min, G/min (US)
kW, HP (US)
V2.0/02.11