Notes On Safety/Product Selection; Approved Use; Skilled Personnel; Accuracy Of The Technical Documentation - WEBTEC HPM Manual

1. Notes on safety/product selection
1.1 Approved use
The device is approved for use in applications described in the Operat-
ing Instructions only. Any other use is not approved and can lead to
accidents or the destruction of the device. Non-approved use will result
in the immediate expiry of all guarantee and warranty claims against the
manufacturer.
Serious malfunctions leading to personal injury or damage to
property can result from using the chosen product in applications
that do not comply with the given specifications or from disre-
garding the operating instructions and warning notes.
1.2 Skilled personnel
These operating instructions have been written for skilled personnel
who are familiar with the valid regulations and standards applicable to
the field of application.
1.3 Accuracy of the technical documentation
These operating instructions were created with the utmost care and at-
tention. However, we offer no guarantee that the data, graphics and
drawings are correct or complete. Subject to alteration without notice.
1.4 High-pressure applications
Selection
When selecting pressure components, ensure that the overload
pressure will not be exceeded.
It is possible that the pressure cell can be deformed when the
overload pressure is exceeded (depending on the duration/fre-
quency and level of the pressure spike).
The 'diesel effect' caused by entrapped air can result in pres-
sure spikes that far exceed the overload pressure. The nominal
pressure of the pressure component should be higher than the
nominal pressure of the system to be measured.
V2.0/02.11
Notes on safety/product selection
73