Display Format (Disp) - WEBTEC HPM Manual

• The following message will be displayed if no sensor is connected
to the device:
5.1 Display format (DISP)
The TEMP display applies only to 'SCPT' type sensors.
V2.0/02.11
Connecting the sensors/display functions
Press DISP (once)
It is possible to change the display format by
pressing DISP (once only).
Available for selection:
ACT
= Actual values
MIN
= Minimum values
MAX = Maximum values (pressure spikes)
FS = Full scale (upper range value)
TEMP = Temperature display
83