Table of Contents
Advertisement
NOTE: At the end of the procedure restart the instruments in order to refresh
M9.07 software (It takes 90 seconds to refresh the SW. Please do not interrupt
the restarting process).
TO UPDATE NEW UNITS
- Download the interface software "FLS Calibration System" and the updated
software on www.flsnet.it.
- Launch the software "FLS Calibration System" on the laptop
- Push together ENTER and ESC powering the monitor
- Connect M9.07 to the laptop by the USB cable
- Select the item (M9.07) which appears on the surfing area on the software
"FLS Calibration System"
- Confirm FW UPGRADE and select the Updated Software
NOTE: At the end of the procedure restart the instruments in order to refresh
M9.07 software (It takes 90 seconds to refresh the SW.
Please do not interrupt the restarting process).
ORDERING DATA
Part
Description /
No.
Name
Panel mount
M9.07.P1
Conductivity &
Flow monitor
Wall mount
M9.07.P1
Conductivity &
Flow monitor
Wall mount
M9.07.P1
Conductivity &
Flow monitor
ACCESSORIES
Part No.
M9.KW1
Wall mounting kit
Wall mounting kit with
M9.KW2
USB cable for device
M9.KUSB
SPARE PARTS
Part No.
M9.SN1
Power
supply
12 - 24
VDC
12 - 24
VDC
110 - 230
VAC
Name
144x144mm plastic box and 110/230VAC to 24 VDC power
power supply
interfacing
Name
Fixing snails
Wire power
Sensor Input
Technology
3/4 wire
Flow (Frequency)
3/4 wire
Flow (Frequency)
3/4 wire
Flow (Frequency)
Description
144x144mm plastic box for wall installation
of all panel mount monitors
supply for wall installation of all panel mount monitors
USB cable dedicated to FLS products, 1,5 meter long
Description
2 fixing snails for panel installation of FLS monitors
Output
Conductivity,
2*(4-20mA),
Temperature,
2*(S.S.R.),
2*(mech. relay)
Conductivity,
2*(4-20mA),
Temperature,
2*(S.S.R.),
2*(mech. relay)
Conductivity,
2*(4-20mA),
Temperature,
2*(S.S.R.),
2*(mech. relay)
15
Advertisement
Table of Contents
