Sata Configuration - Lex Computech 2I380D User Manual

4-6-6 SATA Confi guration
Advanced

SATA Configuration

SATA Controller
Chipset SATA Mode
SATA Speed
IDE Mode
SATA Port 0 Connected to an ODD
SATA Port 1 Connected to an ODD
Serial ATA Port 0
Serial ATA Port 1
F1 Help
Esc Exit Select Menu
SATA Controller
Use this item to Enable or Disable SATA Device.
The optional settings are: Enabled (default) or Disabled
Chipset SATA Mode
Determine how SATA controller (s) operate.
The optional settings are: IDE Mode (default), AHCI Mode.
SATA Speed
Indicates the maximum speed the SATA controller can support.
The optional settings: Gen1, Gen2 (default).
IDE Mode
Legacy IDE or Native IDE MODE,
The optional settings: Legacy IDE or Native IDE (default)
InsydeH20 Setup Utility
[Not Installed]
[Not Installed]
Select F5/F6
Enter
<Enabled>
<IDE>
<Gen1>
<Native IDE>
<Enabled>
<Enabled>
Change Values
Select SubMenu
37
Rev. 5.0
DISABLED: Disables
SATA Controller.
ENABLED: Enables
SATA Controller.
F9 Setup Defaults
F10 Save and Exit