Advertisement
Fig. 5: the upper cover is put together with the base, please make sure the cover is completely closed.
The egg turning rod shall insert into the channel of movable egg tray. The device can begin to work af-
ter powered on.
Fig. 6: Please don't worry about the fuse link besides the power socket, and don't move it as in normal
use. The fuse link may be damaged if the device doesn't work after powered on, the fan doesn't'! run
and there's no temperature display. The device begins to work after powered -on, the temperature
may display " L" at the beginning, at the moment, you should only need to push one ofthe three but-
tons on the device to display the temperature. Please don'! adjust the parameter if you are not quite
familiar with the control parameter description. lt will be fine if you hatch egg as factory preset, and it
still has high hatchability. Turn the cross-ventilation hole on the upper right side to the maximum 18
days later
Fig. 7: when the egg is about to hatch poult (that is days lll or 19), take the movable egg tray out from
the device the egg tray once one or two hatching eggs are seen hatched. Don't turn the egg to ensure
humidity of device, and clean the egg shell on time after hatching, and the poult can be taken out for
feeding or vaccination after the furon body get dry. The subsequent cultivation technology is omitted
here.
l. Cautions:
l. Unpack the box and check the incubator, check whether all of the accessories inside ofthe packing
hos are well-equipped, including one power line, one base, one mesh plate, one movable egg tray, 6
egg (ray grilles, one cover.
© by WilTec Wildanger Technik GmbH
Seite 15
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Advertisement
