Drawbar Inspection - HOGG & DAVIS ODP 20-4 Manual

2,000 Lb. Four Drum Puller

Drawbar inspection

 Regularly inspect he drawbar for wear and damage. If
wear exceeds 1/8", replace the drawbar eye.
 Check all drawbar mounting fasteners for proper torque
 Do not modify or add to the product
 Do not weld on this product without written permission
from the factory
 Be sure the drawbar size is compatible with the coupling
device on the tow vehicle
 Do not damage the coupling components. Be
particularly careful during coupling and uncoupling
 Inspect the coupling device on the tow vehicle for proper
locking prior to use
 Consult OSHA and DOT regulations and American
Trucking Association guidelines for complete operating
procedures.
ODP 20-4
© COPYRIGHT 2016 HOGG & DAVIS, INC
- - 12 - -