LUBRICATION AND MAINTENANCE
This unit has no set PM schedule beyond that of the engine
manufacturers suggested maintenance schedule. This unit
should be visually inspected prior to each use while repairing
any and all discrepancies prior to use.
Items to be inspected prior to use are:
Drive Chains and sprockets for wear and slack
Pintle eye (excessive wear)
Safety Chains (wear / damage)
All welds and seams
Loose or missing fasteners (bolts, nuts, set screws)
Loose or leaking hydraulic hoses
Damaged or worn hydraulic hoses
Brake calipers (loose fittings, hoses, worn linings)
Brake Pads
Brake rotors
Tires and trailer brakes
Engine and hydraulic system fluid levels.
Lubrication Schedule
Drive chain and sprockets ( daily )
Reel Shaft Bearings (as needed)
Reel Bearings (as needed)
Engine oil as per manufacturers recommendation
Idler sprocket ( daily )
Axle Bearings (as needed)
ODP 20-4
2,000 Lb. Four Drum Puller
© COPYRIGHT 2016 HOGG & DAVIS, INC
- - 11 - -