4: Connecting The Ac Power Cord - Sony STR-DA1000ES, STR-DB790 Operating Instructions Manual

4: Connecting the AC
power cord
Connect the AC power cord to a wall outlet.
AC OUTLET
AC power
cord
* Models of area code U, CA, SP only.
The configuration, shape, and number of AC outlets
vary according to the model and the area code.
Notes
• The AC OUTLET(s) on the rear of the receiver is a
switched outlet, which supplies power to the
connected component only while the receiver is
turned on.
• Make sure that the total power consumption of the
component(s) connected to the receiver's AC
OUTLET(s) does not exceed the wattage stated on
the rear panel. Do not connect high-wattage
electrical home appliances such as electric irons,
fans, or TVs to this outlet. This may cause a
malfunction.
Performing initial setup
operations
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure.
This procedure can also be used to return
settings you have made to their factory defaults.
AC OUTLET *
b
To a wall outlet
1
Press ?/1 to turn off the receiver.
2
Hold down ?/1 for 5 seconds.
"INITIAL" appears in the display.
The following are reset to their factory
settings.
• All settings in the SP SETUP, LEVEL,
EQ, CUSTOMIZE and TUNER menus.
• The sound field memorized for each
input and preset station.
• All preset stations.
• All index names for inputs and preset
stations.
GB
19