Repair Policy; Return Procedure; Sales & End-User License Agreement - Masimo NomoLine ISA CO2 Operator's Manual

NomoLine ISA CO2
Zeroing
The highly stable NomoLine ISA CO2 spectrometer requires no regular zeroing. A room air
reference measurement is performed when the NomoLine is disconnected from the LEGI
connector, provided that CO
the LEGI blinking green.

Repair Policy

Masimo or an authorized Service Department must perform warranty repair and service. Do
not use malfunctioning equipment. Have the instrument repaired.
Please clean contaminated and/or dirty equipment before returning, following the cleaning
procedure described in Cleaning Procedure. Make sure the equipment is fully dry before
packing.
To return the NomoLine ISA CO2 for service, please follow the Return Procedure below on
page 30.

Return Procedure

Clean contaminated/dirty equipment before returning, following instructions in the Cleaning
Procedure section. Make sure the equipment is fully dry before packing. Contact the seller to
request instructions on how to return the equipment. Package the equipment securely, in the
original shipping container if possible, and enclose or include the following information and
items (or other information as the seller requires):
•
A letter describing in detail any difficulties experienced with the NomoLine ISA
CO2.
•
Warranty information, a copy of the invoice or other applicable documentation
must be included.
•
Purchase order number to cover repair if the NomoLine ISA CO2 is not under
warranty, or for tracking purposes if it is.
•
Ship-to and bill-to information.
•
Person (name, telephone/Telex/fax number, and country) to contact for any
questions about the repairs.
•
A certificate stating the NomoLine ISA CO2 has been decontaminated for
bloodborne pathogens.
•
Return the NomoLine ISA CO2 to the shipping address provided by the seller.
Sales & End-User License Agreement
This document is a legal agreement between you ("Purchaser") and Masimo Corporation
and/or its relevant subsidiary or affiliate ("Masimo") for the purchase of this Product
("Product") and a license in the included or embedded software and/or firmware ("Software").
Except as otherwise expressly agreed in a separate contract for the acquisition of this Product,
the following terms are the entire agreement between the parties regarding your purchase of
this Product. If you do not agree to the terms of this agreement, promptly return the entire
Product, including all accessories, in their original packages, with your sales receipt to
www.masimo.com
measurements are stable. This zeroing procedure is indicated by
2
30
Chapter 6: Service and Maintenance
Masimo