Specifications - Quanser AMPAQ-PWM User Manual

3 SPECIFICATIONS

Table 3.1 lists the AC input requirements for the AMPAQ-PWM. The PWM output specifications are given in Table
3.2, and the general amplifier specifications are listed in Table 3.3.
AC Input Specifications
Input Voltage Range
Input Frequency Range
AC Current Rating
Fuses
Protection Class
PWM Output Specifications
Maximum Continuous Output Current
Maximum Peak Output Current
(Maximum duration approximately 2 seconds.)
Maximum Output Voltage
(Output voltage is dependent on the input voltage.)
Switching Frequency
Caution: Do not exceed the maximum PWM load ratings of 3.75 A continuous, 15 A peak, and 240 VAC.
AMPAQ-PWM User Manual
Value
100 VAC - 120 VAC or
200 VAC - 240 VAC
50 Hz - 60 Hz
3.75 A
3.5 A, 250 V, 3AG Slow Blow
Class I
Table 3.1: AC Input Specifications
Table 3.2: PWM Output Specifications
Value
3.75 A
15 A
240 VAC
20 kHz
DRAFT - August 15, 2016