H3C S3100 Series Operation Manual page 26

Operation Manual (For Soliton) – VLAN-VPN
H3C S3100 Series Ethernet Switches
4.2.1 Configuration Prerequisites
The edge devices can communicate with the user devices properly.
4.2.2 Configuring a BPDU Tunnel
Follow these steps to configure a BPDU tunnel:
Enter system view
Configure a private
multicast MAC address
for packets transmitted
along the tunnel
Enter Ethernet port view
Enable BPDU tunnel for
packets of a specific
protocol
To do...
system-view
bpdu-tunnel
tunnel-dmac
mac-address
interface interface-type
interface-number
bpdu-tunnel
protocol-type
Chapter 4 BPDU Tunnel Configuration
Use the command...
4-4
Remarks
—
Optional
By default, the destination
MAC address for packets
transmitted along a BPDU
tunnel is 010f-e200-0003.
—
Required
By default, BPDU tunnel
is disabled for packets of
any protocol.