Prior To Use; Selection Of Right Equipment; Intended Purpose Of Equipment; Application Of Use (Zone Xx) In Accordance With Equipment Category - Atexor Slam Trans 200 EX Instructions For Safe Use

The unit is plugged-in and checked that it is working properly after all accomplished tests
above.
Visual inspection
A final check to see everything is fine (screws attached properly, wires connected and
required markings attached).

Prior to use

2.1 Selection of right equipment

You need to be sure that the equipment you intend to take into explosion hazardous area
matches up with the zone classification and other safety requirements related. At least the
following points should be notified prior to use:

2.1.1 Intended purpose of equipment

Please keep in mind what the actual application of equipment is. For example in case the
equipment is to be moved when connected to the supply it needs to be designed for that
purpose. If the certification is mentioning "portable" it means that the equipment is suitable
and tested for portable use. If the certification does not mention portable it means that the
equipment shall not be moved when it is in operation (reliable fixing of equipment).
Slam® -units are designed and tested for portable use.
2.1.2 Application of use (Zone XX) in accordance with equipment
category
Operator has the best knowledge of area classification at his site. To help the operators'
selection of equipment the certification is describing the equipment category. For explosion
8/16