Operation / Handling; General; Controller - Software - WDT Soldos V3 Operating And Installation Instructions

Brine nebulization system
Table of Contents

Advertisement

Brine Nebulization System, Type Soldos V3
6

Operation / handling

6.1
The work described here may only be performed by appropriately trained and
instructed persons. Alternatively, this can be done by operating personnel who
have fully read and understood the operation instructions and are familiar with the
device.
The operation can be started once all commissioning preparations have been
completed.
CAUTION !
Disinfection as described in Section 5.2.1, Disinfecting and rinsing
the Soldos V3, must be performed and documented during initial
operation and before use after more than 28 days of inactivity to
protect against germs and bacteria.
It is not relevant how long the device has been used during this time.
6.2
The controller of the Soldos V3 is operated by using a touch display on the front
of the device.
External control signals (e.g. button) and the fault indication can be connected at
the control panel in the housing as required.
Index: 03
Change date: 01/03/2017

General

Controller - software

Operating instructions no.: BA DW 005-03 Soldos V3 EN.docx
Page 27 of 70

Advertisement

Table of Contents
loading

Related Products for WDT Soldos V3

Table of Contents