Usage - Razor E-XR Owner's Manual

USAGE

How to Operate
Do not activate the thumb throttle unless you are on the E-XR and in a safe, outdoor environment suitable
for riding.
How to Ride
Once you have charged the battery (see page 5 for charging information):
1. Power ON: Put up kickstand and turn the power ON by pressing and holding power button (A) down for 3
seconds. Power is ON when the indicator light next to power button turns a solid green.
2. Headlight and Taillight: To activate the headlight and taillight the product must be powered ON, as detailed
above in Step #1. Press the power button once to activate the headlight and taillight. To deactivate the headlight
and taillight, press the power button once again.
3. Get on the scooter and place both hands on the handlebars. Kick to start (B), and then press down on the thumb
throttle (C).
A
How to Stop
1. To stop, release the throttle and apply the brake until the product comes to a complete stop.
2. When the brake is applied the brake light will illuminate. The brake light is always functional and independent of
the other lights being activated.
3. Make sure to turn the product OFF after your ride is complete. Pressing and holding the power button down for 3
seconds will turn the product OFF completely.
Note: When powered ON and the battery power is low, the indicator light next to the power button will become a
flashing green light.
C
7
B
Note: Electric scooter must be
moving at least 3 mph (5 km/h)
while engaging throttle to
engage motor.
Note: As an additional safety
feature, the scooter is designed to
cut power to the motor when the
hand brake is applied.
Note: Motor will re-engage,
(without having to kick start), if
brake is released and throttle is
engaged before scooter has slowed
down to under 3 mph (5 km/h).
Note: Practice riding only in wide
open areas clear from curbs,
parking blocks and other obstacles.
Impacting the wheels against
any hard surface can damage the
wheels. Wheels are not covered
under the limited warranty.