Step 2: Setting The Time - Sony MHC-G202/C20 Operating Instructions Manual

Connect the FM/AM antennas.
2
Set up the AM loop antenna, then
connect it.
Extend the FM lead
antenna horizontally.
AM loop antenna
3
Set VOLTAGE SELECTOR to the
position of your local power line
voltage (Except for North American,
Mexican, and Australian models).
VOLTAGE SELECTOR
110V-120V
Connect the AC power cord to a
4
wall outlet.
If the plug of this unit does not fit your
wall outlet, detach the supplied adapter
from the plug (Except for North
American models).
Inserting two R03 (size AAA)
batteries into the remote
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates
the system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
Step 2: Setting the
time
A N T
E N N
A
You must set the time beforehand to use the
F M
7 5 0 H
M
timer function.
A M
220V-240V
1
2
3
4
1,3,5 2,4
Press CLOCK SET for a few
seconds, when the power is off.
"– – : – –" appears.
P r e s s ) ± o r a n d s e t
0
the hour.
"A" indicates AM and "P" indicates PM.
Press CLOCK SET.
The minute indication flashes.
P r e s s ) ± o r a n d s e t
0
the minute.
MHC-G202/C20. 3-859-548-12. EN
continued
5