Playing Only The Beginning Of Each Track - Sony MHC-G202/C20 Operating Instructions Manual

4
P r e s s ) ± o r
0
track.
Selected track
1
PROGRAM
2 3
Selected disc
5
Press PROGRAM.
The track is programmed. The last
programmed track appears.
6
To program additional tracks,
repeat steps 3 to 5.
Skip step 3 if you select a track from the
same disc.
7
P r e s s · P .
All the tracks play in the order you
selected.
To Press
Program a pause · P
Stop play
p
Cancel program p
play
Erase a track CLEAR on the remote in
from the end stop mode
Erase the entire p for more than two
program seconds
Tips
• The program you made remains after the Program
Play has finished. To play the same program
again, press ·P .
• "FULL" appears when you have programmed
more than 32 track numbers.
t o s e l e c t a
Playing only the
beginning of each track
— Music Scan
PRESET EQ
FLAT ROCK POPS JAZZ
The begining of each track on all the CDs in
the CD tray play for 10 seconds.
To play only the begining of each
track
Press M. SCAN on the remote.
Track number blinks during the scanning.
To cancel music scan
Press M. SCAN on the remote again.
M.SCAN
MHC-G202/C20. 3-859-548-12. EN
17