Basic Operations; Playing A Cd - Sony MHC-G202/C20 Operating Instructions Manual

Basic Operations

Playing a CD

You can play up to three CDs continuously.
DISC 1–3 VOLUME
2
p ›0/)–
1
Press § and place a CD on the disc
tray.
With the label
side up. When
you play a single
CD, place it on
the inner circle
of the tray.
To place the third disc, press DISC SKIP
to rotate the disc tray.
2
P r e s s · P .
The disc tray closes and play starts from
the CD loaded on the tray whose button
is lit green.
Track number
1
2 3
DISC
Disc tray number
To
Stop play
Pause
Select a track
1
Find a point in
a track
Select a CD
Remove or
exchange the
CD
Adjust the
volume
Tips
• Pressing ·P when the power is off
automatically turns the power on and starts CD
playback if there is a CD on the tray (One Touch
Play).
• You can switch from another source to the CD
player and start playing a CD just by pressing
·P (Automatic Source Selection).
• When the disc tray is selected or the CD loaded on
the tray is playing, the DISC 1 – 3 button for the
tray is lit green.
PRESET EQ
FLAT ROCK POPS JAZZ
Playing time
Do this
Press p.
Press ·P. Press again to
resume play.
P r e s s ) ± o r 0
+ or = on the remote).
Press and hold down ) ±
or 0 during play and
release it at the desired point.
Press DISC 1 – 3 or DISC SKIP.
Press §.
Turn VOLUME (or press VOL
+ or – on the remote).
MHC-G202/C20. 3-859-548-12. EN
( o r
9