Playing Only The Beginning Of Each Track - Sony LBT-G1 Operating Instructions Manual

4
Press )± or ≠0 to select a
track.
Selected track
1
PROGRAM
2 3
Selected disc
5
Press PROGRAM.
The track is programmed. The last
programmed track appears.
6
To programme additional tracks,
repeat steps 3 to 5.
Skip step 3 if you select a track from
the same disc.
7
Press ·P.
All the tracks play in the order you
selected.
To Press
·P
Programme a pause
p
Stop play
p
Cancel programme
play
Erase a track CLEAR on the remote in
from the end stop mode
p for more than two
Erase the entire
programme seconds
Tips
• The programme you made remains after the
Programme Play has finished. To play the same
programme again, press ·P.
• "FULL" appears when you have programmed
more than 32 track numbers.
Playing only the
beginning of each track
— Music Scan
PRESET EQ
FLAT ROCK POPS JAZZ
The begining of each track on all the CDs in
the CD tray play for 10 seconds.
To play only the begining of each
track
Press M. SCAN on the remote.
Track number blinks during the scanning.
To cancel music scan
Press M. SCAN on the remote again.
M.SCAN
LBT-G1. 3-859-546-13. EN
17