Table of Contents
Advertisement
16
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
Programming the CD tracks
(continued)
4
Press )± or ≠0 to select a
track.
Selected track
1
PROGRAM
2
3
FLAT
Selected disc
5
Press PROGRAM.
The track is programmed. The last
programmed track appears.
6
To program additional tracks,
repeat steps 3 to 5.
Skip step 3 if you select a track from the
same disc.
7
Press ·P.
All the tracks play in the order you
selected.
To
Press
·P
Program a pause
p
Stop play
p
Cancel program
play
Erase a track
CLEAR on the remote in
from the end
stop mode
p for more than two
Erase the entire
program
seconds
Tips
• The program you made remains after the Program
Play has finished. To play the same program
again, press ·P.
• "FULL" appears when you have programmed
more than 32 track numbers.
MHC-G101. 3-859-547-13. EN
Playing only the
beginning of each track
— Music Scan
The begining of each track on all the CDs in
the CD tray play for 10 seconds.
PRESET EQ
ROCK
POPS
JAZZ
To play only the begining of each
track
Press M. SCAN on the remote.
Track number blinks during the scanning.
To cancel music scan
Press M. SCAN on the remote again.
M.SCAN
Advertisement
Table of Contents
