Emerson Numatics G2-2 ControlNet Series Quick Start Manual page 4

5) Communication Module Rotary Switches
The Rotary switches allow the user to set the node address.
Rotary Switch Settings
Network Address:
Switch
NA 01 Sets the Ones Digits
NA 10 Sets the Tens Digits
!
G2-2 Series ControlNet Quick Start Manual
Description
•
Address is set to a default setting of 00 prior to shipment.
•
Rotary switch settings do not take effect until power is cycled (turned
OFF and ON).
TDG22CNQS4-0
Subject to change without notice
www.numatics.com/fieldbus
1/07
Page 4