Emerson Numatics G2-2 ControlNet Series Quick Start Manual page 2

3) MCM - Manual Configuration Module (for Self-Test Mode Function Only)
Rotary Switch
The MCM is the module that allows the user to manually test the Numatics manifold using Self-Test mode.
The MCM consists of two DIP switch sets (SW1 and SW2) and two rotary switches (SW3 and SW4).
MCM Module Part Numbers
G2-2 Series ControlNet Quick Start Manual
Rotary Switch
(SW3)
(SW4)
All DIP switches shown in the "OFF" position
Description
Complete Module
Replacement Board
Subject to change without notice
www.numatics.com/fieldbus
DIP Switch
(SW2)
DIP Switch
(SW1)
4 4
1 2 3 5 6 7 8 1 2 3
TDG22CNQS4-0 1/07
5 6 7 8
Part Number
239-1384
256-684
Page 2