Kit with 3x lyra bi-color 1 x 1 led soft lights (4 pages)
Summary of Contents for Ikan OYC15
Page 1
Quick Start Guide OYC15 Onyx Digital Color LED 1 x 2 Soft Light w/ Tuneable RGB Color Control What’s Included 1 x OYC15 Light Fixture 1 x Power supply 1 x Power cord 1 x Yoke because we’re filmmakers too...
General Information Thank you for buying the Ikan Onyx Digital Color RGBWA LED Light. This fixture has been designed to perform reliably for years when the guidelines in this booklet are followed. Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this unit. These instructions contain important information regarding safety during use and maintenance.
General Guidelines Please make sure there are NO FLAMMABLE MATERIALS close to the fixture while operating, to prevent any fire hazard. This fixture will heat up due to the fact that the heatsink for the light is the aluminum shell. The fixture must be installed in a location with adequate ventilation, at least 1.5 feet (.5m) from adjacent surfaces.
The control knob allows for local control over the color choice in the RGB mode. It also allows for adjustment when choosing how much of each color is selected. All OYC15 lights are RGBWA fixtures, this allows the user to adjust the CCT, HSI, RGB, Hue Shift control. It gives the user the ability to switch from 2800K-10,000K by scrolling through the color temperatures.
Regular inspections are recommended to insure proper function and extended life. There are no user serviceable parts inside this fixture. Please refer all other service issues to an authorized ikan service technician. Should you need any spare parts, please order genuine parts from your local ikan dealer.
Need help?
Do you have a question about the OYC15 and is the answer not in the manual?
Questions and answers