Functional description of the AddFEM SoE
The functional description of the AddFEM SoE corresponds to that of the AddFEM and is
described in the correspondingly named section in the "AddFEM (Front End Module)"
operating instructions. The document is available under the following link:
Internet (http://www.siemens.com/automation/service&support)
Additional functions are explained below.
3.1
Functional description
Overview
In the following figure, the functional principle of the Sequence of Event is explained as an
example.
①
②
③
④
⑤
⑥
AddFEM Sequence of Event
Operating Instructions, 03/2016, A5E00075541X-06
Glass fiber optic cable, 6DL9902-8AA/8AB
SoE repeater module, 6DL9200-8AA
SoE repeater extension module, 6DL9201-8AA
A maximum of 5 SoE repeater extension modules is possible.
Mounting rail
Plastic fiber-optic cable, 6DL9903-8AA/8AB
AddFEM SoE
3
13