Siemens SIMATIC PCS 7 Operating Instructions Manual page 5

Preface
Scope of the document
The operating instructions apply to the device:
● AddFEM Sequence of Event, article number 6DL3100-8AC03
Only the front-end function "Sequence of Event" is explained in these operating instructions.
The AddFEM basic functions are described in the AddFEM (Front End Module) operating
instructions. Information about the following topics is available in the correspondingly named
sections in the AddFEM (Front End Module) operating instructions:
● AddFEM structure
● Accessories
● Safety information
● Area of application of the AddFEM
● Mounting the AddFEM
● Connecting the AddFEM
● Operating the AddFEM
● Maintenance and servicing
In addition, information about the following devices is available:
● SoE repeater module
● SoE repeater extension module
The document is available under the following link:
Internet (http://www.siemens.com/automation/service&support)
Enter "AddFEM" in the Site Explorer. All the relevant documents are then displayed.
Note
This document belongs to the AddFEM Sequence of Event and is also required for repeat
commissioning. Keep the enclosed and supplementary documentation in a safe place for the
entire life cycle of the AddFEM Sequence of Event.
Pass on all documents belonging to the AddFEM Sequence of Event to any future owner or
user.
Make sure that every supplement to the documentation that you receive is stored together
with the operating instructions.
4
AddFEM Sequence of Event
Operating Instructions, 03/2016, A5E00075541X-06