Other A/V Components; Connecting A Tape Deck, Vcr, Etc - Sony DHC-MD555 Operating Instructions Manual

" Other A/V Components

Connecting a tape
deck, VCR, etc.
To enhance your system, you can connect
optional components. Analog sound from the
connected component is recorded as an
analog signal on the MD.
Refer to the operating instructions of each
component.
Connecting the audio cords (not
supplied)
When using audio cords (not supplied) to
connect other AV components to the system,
make sure to insert the plugs firmly, pushing
them in all the way. No sound will be
produced if the plugs are not inserted
securely.
Not pushed in all the way
Insert completely
78
Connecting the optional
TC-PX100 tape deck
CD Synchro Recording and Timer Recording
are possible when the TAPE CONTROL jacks
are connected.
Refer to the operating instructions included
with the TC-PX100 tape deck for details.
N.G.
TAPE CONTROL jack
OK
Tip
The
guide you to connect the optional TC-PX100 tape
deck.
Connecting another tape
deck
Connect the tape deck to the TAPE IN and
OUT jacks on the rear panel of the system.
TAPE OUT
jacks
TAPE IN
jacks
A
B
A
B
A
and B markings of the TAPE IN/OUT jacks
Tape deck
To the audio
input of a
tape deck
A
B
To the audio
output of a
tape deck