JETI model Duplex REX Series User Manual page 24

computer radio control system
Receiver with the UDI output
- suitable for connection of devices with unidirectional UDI
interface (e.g. VBar)
- UDI output can be selected on E1 or E2 output
- the servo impulses are generated on other servo outputs, it is
possible to connect telemetry sensors to the Ext. connector as
usual
FailSafe
Enabled
For receivers we grant a warranty of 24 months from the day of
purchase under the assumption that they have been operated
in conformity with these instructions at recommended
voltages and that they were not damaged mechanically.
Warranty and post warranty service is provided by the
manufacturer.
We wish you sucessful flying with the products of:
JETI model s.r.o. Příbor, www.jetimodel.com
OutputPeriod
17 ms (or Auto)
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
E1 or E2 Rx mode
UDI12 Normal
22
UDI Mode
Direct