Step 7: Connecting The Mains Leads - Sony DAR-RD100 Operating Instructions Manual

Step 7: Connecting the
Mains Leads
Plug the recorder, subwoofer, and TV mains leads
(power cords) into the mains.
DVD recorder
to mains
Subwoofer
Check that the "/1 indicator on the centre unit
lights up when the subwoofer mains lead is
connected.
Centre unit
"/1 indicator
After you connect the recorder mains lead, you
must wait a short while before operating the
recorder. You can operate the recorder once the
front panel display lights up and the recorder
enters standby mode.
If you connect additional equipment to this
recorder, go to "Connecting the Recorder to Other
Equipment" (page 24) before connecting the
mains leads.
After all connections are complete, follow the
steps of "Step 8: Initial Setup" (page 28).
to mains
FUNCTION VOLUME VOLUME
To turn the recorder on and off
Press DVD [/1.
When you turn off the recorder, the recorder enters
standby mode.
To turn the speaker system on and off
Press AMP [/1.
When you turn off the speaker system, the speaker
system enters standby mode and the [/1 indicator
on the centre unit display lights up in red.
23