Language Settings; Audio Settings - Sony DAR-RD100 Operating Instructions Manual

Language Settings

The [Language] Setup allows you to select a
language for the recorder's display and discs.
Select [Language] in the Setup Display. To use
the display, see "Using the Setup Displays"
(page 74).
The default settings are underlined.
Language
OSD
Menu
Audio
Subtitle
[OSD] (On-Screen Display)
Switches the display language on the screen.
[Menu] (DVD VIDEO only)
Switches the language for the DVD menu.
[Audio] (DVD VIDEO only)
Switches the language of the sound track.
[Subtitle] (DVD VIDEO only)
Switches the language of the subtitles recorded on
the disc.
[ Original ] Selects the language given
priority in the disc.
[ Other ] The display for entering a
language code appears. Press the
number buttons to enter a four-
digit code number from
"Language Code List" (page 116)
and press ENTER.
Note
If you select a language in [Menu], [Subtitle], or [Audio]
that is not recorded on the DVD VIDEO, one of the
recorded languages will be automatically selected.

Audio Settings

The [Audio] Setup allows you to adjust the sound
according to the playback and connection
conditions.
Select
display, see "Using the Setup Displays" (page 74).
Underlined below are the default settings
optimized for the best surround effect with the
supplied speaker system.
English
Deutsch
Italiano
Español
Português
[Dolby Digital] (DVDs only)
Selects the type of Dolby Digital signal when
using the DIGITAL OUT (OPTICAL or
COAXIAL) jack.
If [D-PCM] is selected, surround effect will be lost in
some Sound Field settings.
[DTS] (DVD VIDEO only)
Selects whether or not to output DTS signals when
using the DIGITAL OUT (OPTICAL or
COAXIAL) jack.
[Audio] in the Setup Display. To use the
Audio
Dolby Digital
DTS
MPEG
Sampling Freq.
Audio DRC
Vocal
[ D-PCM ] Select this when the recorder is
connected to an audio component
without a built-in Dolby Digital
decoder.
[ Dolby Select this when the recorder is
Digital ] connected to the speaker system.
Note
[ Off ] Select this when the recorder is
connected to an audio component
without a built-in DTS decoder.
[ On ]
Select this when the recorder is
connected to the speaker system.
D-PCM
Dolby Digital
79
,continued