Step 4: Connecting The Ac Power Cords (Mains Leads) - Sony DAV-SR4W Owner's Manual

Step 4: Connecting the AC Power Cords (Mains Leads)

Before connecting the AC power cords (mains leads) of this system and the surround speaker (L) to a
wall outlet (mains), connect the front and center speakers to the system and surround speaker (R) to the
surround speaker (L) (see page 14).
When placing the surround
speaker (L) in the (R) position
Depending on the location of the wall outlet
(mains), you can also place the surround speaker
(L) (with the IR receiver) in the (R) position if
necessary.
"/1
C/X/x/c/
ENTER
With cover opened.
1
Press "/1 on the system to turn the
system on.
2
Press AMP MENU.
3
Press X/x repeatedly until
"CUSTOMIZE" appears in the front
panel display, then press ENTER or c.
The system enters the Customize Menu
mode.
4
5
6
AMP MENU
Press X/x repeatedly until "SL SR
REV" appears in the front panel
display, then press ENTER or c.
Press X/x repeatedly until the item you
want to set appears in the front panel
display.
xOFF (default)
Sets the surround speaker (L) (with the IR
receiver) in the (L) position.
xON
Sets the surround speaker (L) (with the IR
receiver) in the (R) position.
Press AMP MENU.
The AMP menu turns off.
25 GB