Step 4: Connecting The Mains Leads - Sony DAV-SC8 Operating Instructions Manual

Notes
• Do not connect the system to a VCR. If you pass video signals from the system via a VCR, you may not receive a
clear image on the TV screen.
• If you cannot view the picture from a VCR through this system which is connected to a TV with RGB component
jacks, set
the VCR.
• If you want to use your VCR's SmartLink function, connect the VCR to your TV's SmartLink jack.
• The SmartLink function may not work properly if your VCR is connected to your TV via this system.
• The system does not output S video signals.
• When you select "DVD" by pressing FUNCTION (page 56), the video signal and RGB signal are not output from
the VIDEO IN jacks. Also, the system cannot output the component video signal.
• When you select VIDEO 1 or VIDEO 2 by pressing FUNCTION (page 56), the audio signal from the AUDIO L/
R jack is output to the connected speakers. The audio signal is not output from the T EURO AV OUTPUT (TO
TV) jack.

Step 4: Connecting the Mains Leads

Before connecting the mains leads of this system and subwoofer to a wall outlet, connect the speakers
to the system (see page 13).
20 GB
to t (Audio/Video) on your TV. If you select
(RGB), the TV cannot receive the signal from