Clock Setup - Sony DAR-RD100 Operating Instructions Manual

2. OSD language setup
1
Press M/m to select
(language), and press ,.
[Language] Setup appears.
2
Press M/m to select [OSD] (on-screen
display), and press ,.
Language
OSD
Menu
Audio
Subtitle
3
Press M/m to select a language, and press
ENTER.
The on-screen language changes to the
selected language.
4
Press < to return to the Setup Display,
and follow the steps of "3. Clock setup"
(see below).

3. Clock setup

1
Press M/m to select
press ,.
[Settings] Setup appears.
2
Press M/m to select [Clock], and check
that the clock is correctly set.
Settings
Auto Preset
Channel Settings
Clock
TV Aspect
Display Mode
Line1 Decoder
Progressive Mode
PBC
Factory Setup
If incorrect, set the clock manually (page 77).
Or, the timer recording does not work
properly.
3
Follow the steps of "4. TV type setup" (see
below).
[Language]
English
Deutsch
Italiano
Español
Português
[Settings], and
Auto Adjust On
Auto Adjust Off
Date 12 / 04
Year 2005
Time 12 : 00
4. TV type setup
1
Press M/m to select [TV Aspect], and press
,.
Settings
Auto Preset
Channel Settings
Clock
TV Aspect
Display Mode
Line1 Decoder
Progressive Mode
PBC
Factory Setup
2
Press M/m to select the aspect ratio of the
connected TV, and press ENTER.
[4:3]: For a standard 4:3 screen TV without a
wide screen mode. Select [Display Mode] in
[Settings] Setup.
[16:9]: For a wide-screen TV or standard TV
with a wide screen mode.
3
Press SET UP to turn off the Setup Display,
and follow the steps of "5. Basic speaker
setup" (page 29).
If you connect a TV that accepts progressive
625p format signals to the COMPONENT VIDEO
OUT jacks
Set [Progressive Mode] in [Settings] Setup to [On]
(page 78).
z Hint
You can make other adjustments using the Setup
Displays, such as picture, sound, and subtitle languages.
(See "DVD Recorder Set-Up Menu" on page 74.)
5. Basic speaker setup
You can reflect the current speaker positions on
the system. Enter the speaker distance from your
listening position using the AMP menu on the
centre unit display. For details about the AMP
menu, see page 91; about speaker placement, see
page 16.
1
Press AMP [/1 to turn on the speaker
system.
If "FM" or "AM" appears on the centre unit
display, press DVD on the remote to display
"DVD."
4:3
16:9
29
,continued