Brew Unit; Remove The Brew Unit And Wash By Hand - Miele CVA 6401 Operating And Installation Instructions

Brew unit

Remove the brew unit and wash by
hand
Clean the brew unit by hand only un-
der warm running water. Do not use
dish soap or any other cleaning
agent. The moving parts of the brew
unit are greased. Cleaning agents
would damage the brew unit.
You can remove the brew unit for clean-
ing.
Clean it once a week.
 Open the appliance door.
 Remove the water container, waste
unit and the ground coffee chute
cover.
 Press the button on the end of the
handle of the brew unit  and while
doing so turn the handle counter-
clockwise .
 Press the catch in front of the brew
unit  downwards, and pull the brew
unit out carefully.
If you cannot remove the brew unit or
can only do so with difficulty, the brew
unit is not in the correct position (See
"Frequently asked questions").
Cleaning and care
When the brew unit has been pulled
out, do not alter the position of the
brew unit handle. This would cause
the brew unit to be out of alignment
and it would not fit back into the cof-
fee machine.
 Clean the brew unit by hand under
hot running water without using de-
tergent or liquid dish soap.
 Wipe any remaining coffee off the two
filters. One filter is located in the fun-
nel and the other to the left of the
funnel.
 Dry the funnel to prevent ground cof-
fee sticking to it the next time a cof-
fee is made.
 Clean the inside of the coffee ma-
chine. Use your vacuum cleaner to
remove dry coffee grounds.
To put the brew unit into place again:
 Proceed in reverse order: push the
brew unit into the coffee machine,
making sure it is straight.
61