Water Hardness; Display Brightness; Volume; Factory Default Setting - Miele CVA 6401 Operating And Installation Instructions

Settings

Water hardness

See "Before using for the first time" for
information about water hardness.

Display brightness

Change the display brightness using
the arrow keys .

Volume

The volume of the alarm and the sensor
buttons can be set using the arrow but-
tons .
Tip: To switch off the tones, touch the
arrow buttons  until no more seg-
ments are filled in and
pears.
48
Turned off ap-

Factory default setting

You can reset the settings back to the
ones which were set when the coffee
system was delivered - the factory de-
fault settings.
The number of drinks and the appliance
status (No. of drinks until ...) cannot be
reset.
Please refer to the "Setting options"
chart for the factory settings that are
shown in bold.
The following settings will not be re-
set:
– Language
– Time of day
– Date