Switching On And Off - Miele CVA 6401 Operating And Installation Instructions

Switching on and off

Turning on
When the coffee system is switched on,
it heats up and rinses the pipework.
This not only cleans the pipework, but
also warms it before coffee is prepared.
If the coffee system still has an operat-
ing temperature higher than 140°F
(60°C), rinsing will not take place.
 Tap the On / Off button .
The appliance will begin rinsing after
the heating-up phase. Hot water will
come out of the main dispenser.
You can now prepare drinks.
Tip: If you do not want the water from
the rinsing process to flow into the drip
tray, place a suitable container (e.g., the
small cleaning container) underneath
the main dispenser before preparing the
first coffee of the day.
24
Switching the coffee machine
off
 Tap the On/Off button .
If coffee has been dispensed, the coffee
machine will rinse the pipework auto-
matically before switching off.
Turning off for longer periods
of time
If the coffee system is not going to be
used for a longer period of time:
 Empty the drip tray, the waste unit
and the water tank.
 Clean all components thoroughly, in-
cluding the brew unit, the main dis-
penser connector and the small drip
tray located inside the door.
 Turn off the appliance.
If you leave the door open for an ex-
tended period of time, unplug or dis-
connect it from the power supply to
save energy.