Table of Contents
Advertisement
Arranging the components side
by side
Once you have finished the connections, you can
rearrange the components as desired.
Inserting two R6 (size AA)
batteries into the remote
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Notes
• If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
• Be sure to insert the batteries in correct direction.
• Do not mix a new battery with an old one.
• Do not use different types of batteries together.
• Do not use a battery that is leaking.
• If the battery leaks, clean the battery compartment
and replace all the batteries with new ones.
Adjusting the contrast of the
characters in the display
All information for each component appears in the
display on the tuner. While holding down
DISPLAY, press TUNING + or – to adjust the
contrast of the displayed characters. You can
finely adjust the contrast in 7 steps from –3 to +3.
Adjusting the brightness of
the display back light
Press DISPLAY in standby mode to light up the
display back light. While the display is lit, press
TUNING + or – to adjust the back light
brightness.
7
Hide quick links:
Advertisement
Table of Contents
