Timer Recording Radio Programmes - Sony CMT-M100MD Operating Instructions Manual

Notes
• You cannot activate the Daily Timer and recording
timer at the same time.
• If you use the Daily Timer at the same time as the
Sleep Timer, the Sleep Timer has priority.
• Do not operate the system from the time the system
turns on until the play starts (about 30 seconds
before the preset time).
• You cannot use the optional components connected
to ANALOG IN jacks as the sound source for Daily
Timer.
Timer recording radio
programmes
To timer record, you must first preset the radio
station (see "Presetting radio stations" on
page 43) and set the clock (see "Setting the
clock" on page 8).
1
Tune in the preset radio station (see
"Listening to the radio" on page 44).
2
Press CLOCK/TIMER SET on the
remote to display "DAILY SET".
3
Press . or > on the remote
repeatedly to select either "MD REC
SET" or "TAPE REC SET", then press
ENTER/YES on the remote.
"ON" appears and the hour indication
flashes.
4
Set the time to start recording.
Press . or > on the remote repeatedly
to set the hour, then press ENTER/YES on
the remote.
The minute indication flashes.
Press . or > on the remote repeatedly
to set the minute, then press ENTER/YES
on the remote.
5
Set the time to stop recording following
the same procedure as step 4.
6
When you record on an MD, press .
or > on the remote repeatedly to
select the recording mode (e.g., LP2),
then press ENTER/YES on the remote.
The timer recording settings appear, then
the original display returns.
continued
51