Sony CMT-M100MD Operating Instructions Manual page 16

Playing an MD (continued)
Other operations
To
Stop play
Pause
Select a track
Find a point in
a track
Play repeatedly
(Repeat Play)
Remove the MD Press Z MD.
Tip
You can start playing from the desired track in
Normal Play or Programme Play.
Press l or L (or . or > on the remote)
repeatedly until the desired track number appears
after step 2.
Or, press number buttons on the remote. Play
automatically starts.
16
Do this
Press x.
Press MD NX. Press again to
resume play.
Press l or L (or . or
> on the remote) repeatedly
until you find the desired track.
Keep pressing m or M during
play and release it at the desired
point.
Press REPEAT repeatedly during
play until "REP" or "REP1"
appears.
REP: For all the tracks on the MD
up to five times.
REP1: For a single track only.
To cancel playing repeatedly, press
REPEAT repeatedly until both
"REP" and "REP1" disappear.
To enter track number 10 or higher
on the remote
1
Press >10.
2
Enter the corresponding number buttons.
To enter 0, press 10/0.
Example:
To enter track number 30, press >10, then 3 and 10/0.