Runtime,Version Up - Panasonic MDF-DU702VH Service Manual

（Runtime,Version Up）
Keep touching MENU KEY (5 sec)
Move to Menu display, touch service #1
key.
Service code "384"
 Main Battery
Main Battery accumulated time
Backup Battery

Backup Battery accumulated time
 FAN
FAN accumulated time
When each part replace, reset corresponding
data.
※When some version up files are plurality, the first found file is used for version up
※During appearance "wheel", all operations are not able to receive.
※"OK" button in "Result" screen is disable, and all operations are not able to receive.（unless user turn off power）
※"OK" button in "Error" screen is disable, and all operations are not able to received. （unless user turn off power）
※During version up , no communication is not carried out and no log.is not output.
※If you cancel after or during upgrade, restart the main power supply.
Move to Service Code input display, so
input "384" or "335232"
Move to
display, touch Runtime
or Version Up key
Service code "335232"
・Confirm the existence of file in predefined folder of USB
memory.
・If file is not existence, message "File not found." is displayed
in "Notice" screen and the process end.
・If file is a existence, if it is not compatible model, "Confirm
firmware" is displayed and the process is terminated. If it is a
compatible model, "Confirm firmware rewrite · · ·" is displayed
and when "Yes" is selected, version upgrade of the touch
panel embedded software is started, and when "No" is
selected, the process is ended.
・During version up, wheel appear in the screen.
･ When version upgrade is completed, "Firmware rewrite
complete. ..." is displayed.
・If an error (other than Verify check) occurs during version
upgrade, "Firmware rewrite failure ... ..." is displayed
・If a Verify error occurs in the Verify check, "Verify check
NG. ..." is displayed.
-19-
Service #1
Input "384",
only can check
the firmware
version.