1. Manuals
  2. Brands
  3. MiTAC Manuals
  4. Computer Hardware
  5. PH12LI
  6. Product manual

MiTAC PH12LI Product Manual

Desktop board
Hide thumbs
Table of Contents

Advertisement

Quick Links

MITAC Desktop Board PH12LI
Product Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PH12LI and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for MiTAC PH12LI

Summary of Contents for MiTAC PH12LI

  • Page 1 MITAC Desktop Board PH12LI Product Guide...

  • Page 2: Desktop Board Features

    Desktop Board Features This chapter briefly describes the features of Desktop Board PH12LI. Table 1 summarizes the major features of the Desktop Board. Feature Summary 1. M TAC D PH12LI F ABLE ESKTOP OARD EATURES Low-profile Mini-ITX (20 millimeters [0.79 inches] x 170.18...
  • Page 3 USB 2.0 front panel ports (Headers) Peripheral Interfaces Serial port header SATA 3.0 Gb/s Legacy I/O Legacy I/O Controller (NCT6683D) ® Intel vPro™ Technology support Security TPM security by Nuvoton NPCT420AA0WX(optional) Intel Clarkville I217-LM/I210-AT Gigabit (10/100/1000 Mb/s) IC LAN Support Dual Ethernet LAN controller including an RJ-45 back panel connector with integrated status LEDs UEFI Bios...

  • Page 4: Desktop Board Components

    Desktop Board Components Figure 1 shows the approximate location of the major components on the top side of MiTAC Desktop Board PH12LI. Figure 1. MiTAC Desktop Board PH12LI Components (Top)
  • Page 5 2. M TAC D PH12LI C ABLE ESKTOP OARD OMPONENTS HOWN IN IGURE Back Panel Connectors DC Power header(12V) DC Power header(19V) Front dual USB2.0 header System FAN header SATA connector Front Panel Connector CPU FAN header Alternate Power LED header...

  • Page 6: System Memory

    Processor The board supports 4th generation Intel Core processors. Other processors may be supported in the future. This board supports processors with a maximum wattage of 65 W Thermal Design Power (TDP). NOTE This board has specific requirements for providing power to the processor. Additional power required will depend on configurations chosen by the integrator.

  • Page 7: Connecting To The Internal Headers And Connectors

    Connecting to the Internal Headers and Connectors Front panel main header Figure 2 Front panel main header pin-out Signal Name Description Signal Name Description Pull-up resistor (750 ) to +5V HDD_POWER_LED POWER_LED_MAIN [Out] Front panel LED (main color) HDD_LED# [Out] Hard disk activity LED POWER_LED_ALT [Out] Front panel LED (alt color) GROUND...
  • Page 8 Chassis Intrusion Detection Header The chassis intrusion detection header must be 1x2, 2.54mm pitch, colored black and with extended back, as defined in below Figure 3 Chassis intrusion detection header Signal Name Intrusion Detection Ground ABLE HASSIS INTRUSION DETECTION HEADER SIGNALS HD Audio front panel audio header Figure 4 HD Audio front panel audio header pin-out diagram...
  • Page 9 Signal name Description PORT 1L Analog Port 1 - Left channel (Microphone) Ground PORT 1R Analog Port 1 - Right channel (Microphone) Active low signal that signals BIOS that an Intel® HD Audio dongle is connected to the analog header. PRESENCE# = 0 when an Intel® HD Audio dongle is PRESENCE# connected.

  • Page 10: Front Panel Usb Header

    Internal Speaker header Figure 5 Internal Speaker header pin-out diagram Signal Name Front_L- Front_L+ Front_R+ Front_R- ABLE NTERNAL PEKAER HEADER Front panel USB header Figure 6 Front panel USB header pin-out Signal Signal +5V DC +5V DC Data (negative) Data (negative) Data (positive) Data (positive) Ground...
  • Page 11 LVDS inverter power header Figure 7 LVDS inverter power header Pin Signal Name Description 1 BKLT_EN Backlight enable 2 BKLT_PWM Backlight PWM control 3 12V/19V Inverter power 4 12V/19V Inverter power 5 GND Ground 6 GND Ground 7 BRIGHTNESS_UP BRIGHTNESS UP 8 BRIGHTNESS_DOWN BRIGHTNESS DOWN 7 8- LVDS...
  • Page 12 12 LB_DATAN2 LVDS Channel B diff data output-negative 13 LB_DATAP1 LVDS Channel B diff data output-positive 14 LB_DATAN1 LVDS Channel B diff data output-negative 15 LB_DATAP0 LVDS Channel B diff data output-positive 16 LB_DATAN0 LVDS Channel B diff data output-negative 17 GND Ground 18 3.3V/5V/12V...

  • Page 13: Serial Port Header

    Serial port header Figure 9 Serial port header pin-out Signal Signal DCD (Data Carrier Detect) RXD# (Receive Data) TXD# (Transmit Data) DTR (Data Terminal Ready) Ground DSR (Data Set Ready) RTS (Request To Send) CTS (Clear To Send) RI (Ring Indicator) Key (no pin) ABLE ERIAL PORT HEADER SIGNALS...
  • Page 14 System fan header Figure 11: System fan header Signal FAN_CTRL FAN_TACH VCC-12V 11: S ABLE YSTEM FAN HEADER Panel voltage selection header Pins 2&4: jumper position for 3.3V Pins 6&4: jumper position for 5V Pins 3&4: jumper position for 12V Figure 12: LVDS panel voltage selection header...
  • Page 15 Signal Name VCC3/3V LCD SEL PWR VCC/5V 12: LVDS ABLE PANEL VOLTAGE SELECTION HEADER Inverter power voltage selection header Pins 1&2: jumper position for 12V Pins 3&2: jumper position for 19V Figure 13: Inverter power voltage selection header Signal Name 1 12V 2 BKLT_PWR 3 12V...

  • Page 16: Cmos Clear

    Alternate Power LED header Figure 14 Alternate Power LED header Signal Name 1 MAIN COLOR LED 2 KEY 3 ALT COLOR LED 14: A ABLE LTERNATE OWER HEADER RJ45 LED behavior Diagram Color State Condition LAN link is not established Link LAN link is established Green...
  • Page 17 MITAC Desktop Board PH12LI BIOS Specifiction...
  • Page 19 1. Main Page Main Advanced Chipset Boot Security Save & Exit BIOS Information Item help BIOS Vender American Megatrends Core Version 4.6.5.4 Compliancy UEFI 2.3.1; PI 1.2 BIOS Version D7340X01 Build Date and Time 11/07/2013 14:02:20 Processor Information Intel(R) Core(TM) i5-3550S CPU @ 3.00GHz Frequency 3000 MHz Processor ID...
  • Page 20 Default Value Display build date and time of the BIOS Comment This field is not selectable. There is no help text associated with it. Field Name Processor Information Value Display the installed CPU brand. Comment This field is not selectable. There is no help text associated with it. Field Name Frequency Value...
  • Page 21 Help Set the Time. Use Tab to switch between Time elements.
  • Page 22 2. Advanced Page Main Advanced Chipset Boot Security Save & Exit Wireless RF Item help [Enabled] Quick Charging [Disabled] ►S5 RTC Wake Settings ►Trusted Computing ►CPU Configuration ►SATA Configuration ►Intel Rapid Start Technology ►AMT Configuration ►USB Configuration ►SMART Settings ►NCT6683D Super IO Configuration ►Network Stack →←...
  • Page 23 Help Enable system to wake from S5 using RTC alarm Comment Press Enter when selected to go into the associated Sub-Menu. Field Name Trusted Computing Help Trusted Computing Settings Comment Press Enter when selected to go into the associated Sub-Menu. Field Name CPU Configuration Help...
  • Page 24 Field Name Intel ® I210 Gigabit Network Connection – 00:22:4D:A7:23:9B Help Configure Gigabit Ethernet device parameters. Comment Press Enter when selected to go into the associated Sub-Menu.
  • Page 25 2.1 S5 RTC Wake Settings Main Advanced Chipset Boot Security Save & Exit Wake system with Fixed Time [Enabled] Item help Wake up hour Wake up minute Wake up second →← : Select Screen ↑↓ : Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values...
  • Page 26 2.2 Trusted Computing Main Advanced Chipset Boot Security Save & Exit Configuration Item help Security Device Support [Enable] TPM State [Enabled] Pending operation [None] Current Status Information →← : Select Screen TPM Enabled Status: [Enabled] ↑↓ : Select Item TPM Active Status: [Activated] Enter: Select TPM Owner Status:...
  • Page 27 Field Name TPM Enabled Status: Default Value [Enabled] Comment This field is not selectable. There is no help text associated with it. Field Name TPM Active Status: Default Value [Activated] Comment This field is not selectable. There is no help text associated with it. Field Name TPM Owner Status: Default Value...
  • Page 28 2.3 CPU Configuration Main Advanced Chipset Boot Security Save & Exit CPU Configuration Item help Intel(R) Core(TM) CPU [CPU NAME] @ [CPU Freq.] GHz CPU Signature 306c3 Microcode Patch Max CPU Speed 3400 MHz Min CPU Speed 800 MHz CPU Speed 3400 MHz Processor Cores Intel HT Technology...
  • Page 29 Field Name Microcode Patch Default Value CPU Microcode Patch Revision Comment This field is not selectable. There is no help text associated with it. Field Name Max CPU Speed Default Value Displays the Max CPU Speed Comment This field is not selectable. There is no help text associated with it. Field Name Min CPU Speed Default Value...
  • Page 30 Field Name L2 Cache Default Value L2 Cache Size Comment This field is not selectable. There is no help text associated with it. Field Name L3 Cache Default Value L3 Cache Size Comment This field is not selectable. There is no help text associated with it. Field Name Hyper-threading (Hided if HT Not Supported)
  • Page 31 Default Value [Enabled] Possible Value Disabled Enabled Help Enable/Disable CPU C3 report to OS Field Name CPU C6 Report Default Value [Enabled] Possible Value Disabled Enabled Help Enable/Disable CPU C6 report to OS Field Name CPU C7 Report Default Value [CPU C7s] Possible Value Disabled / CPU C7 / CPU C7s...
  • Page 32 2.4 SATA Configuration Main Advanced Chipset Boot Security Save & Exit Item help SATA Mode Selection [AHCI] SATA Controller Speed [Default] Serial ATA Port 0 Empty Port 0 [Enabled] Hot Plug [Disabled] mSATA Port Empty mSATA Port [Enabled] Serial ATA Port 2 Empty Port 2 [Enabled]...
  • Page 33 Default Value [Enabled] Possible Value Disabled / Enabled Help Enable or Disable SATA Port. Field Name Hot Plug Default Value [Disabled] Possible Value Disabled / Enabled Help Designates this port as Hot Pluggable. Field Name mSATA Port Default Value Empty Possible Value SATA Device Model Name mSATA Port...
  • Page 34 Possible Value Disabled / Enabled Help Designates this port as Hot Pluggable. Field Name Serial ATA Port 4 Default Value Empty Possible Value SATA Device Model Name Field Name Port 4 Default Value [Enabled] Possible Value Disabled / Enabled Help Enable or Disable SATA Port.
  • Page 35 2.5 Intel® Rapid Start Technology Main Advanced Chipset Boot Security Save & Exit Intel(R) Rapid Start Technology [Enabled] Item help No valid partition. Entry on S3 RTC Wake [Enabled] Entry After Active Page Threshold Support [Disabled] →← : Select Screen ↑↓...
  • Page 36 2.6 AMT Configuration Main Advanced Chipset Boot Security Save & Exit Intel AMT [Enabled] Item help BIOS Hotkey Pressed [Disabled] MEBx Selection Screen [Disabled] Hide Un-Configure ME Confirmation [Disabled] MEBx Debug Message Output [Disabled] Un-Configure ME [Disabled] Amt Wait Timer Disable ME [Disabled] [Enabled]...
  • Page 37 Possible Value Disabled / Enabled Help OEMFlag Bit 6: Hide un-configure ME without password confirmation prompt. Field Name ME Debug Message Output Default Value [Disabled] Possible Value Disabled / Enabled Help OEMFlag Bit 14: Enable MEBx debug message output. Field Name Un-Configure ME Default Value [Disabled]...
  • Page 38 Field Name AMT CIRA Timeout Default Value Possible Value 0 - 255 Help OEM defined timeout for MPS connection to be established. 0 – use the default timeout value of 60 seconds. 255 – MEBX waits until the connection succeeds. Field Name WatchDog Default Value...
  • Page 39 2.7 USB Configuration Main Advanced Chipset Boot Security Save & Exit USB Configuration Item help USB Devices: 1 Keyboard, 1 Mouse, 2 Hubs Legacy USB Support [Enabled] →← : Select Screen XHCI Hand-off [Enabled] ↑↓ : Select Item EHCI Hand-off [Disabled] Enter: Select +/- : Change Opt...
  • Page 40 Enabled Help This is a workaround for OSes without EHCI hand-off support. The EHCI ownership change should be claimed by EHCI driver.
  • Page 41 2.8 SMART Settings Main Advanced Chipset Boot Security Save & Exit SMART Settings Item help SMART Self Test [Disabled] →← : Select Screen ↑↓ : Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &...
  • Page 42 2.9 NCT6683D Super IO Configuration Main Advanced Chipset Boot Security Save & Exit NCT6683D Super IO Configuration Item help Serial Port 0 [Enabled] Serial Port 1 [Enabled] →← : Select Screen ↑↓ : Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values F3: Optimized Defaults...
  • Page 43 2.10 Network Stack Main Advanced Chipset Boot Security Save & Exit Item help Network stack [Enabled] Ipv4 PXE Support [Enabled] Ipv6 PXE Support [Enabled] →← : Select Screen ↑↓ : Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &...

  • Page 44: Port Configuration Menu

    2.11 Intel ® Ethernet Network Connection i217-LM - 88:88:88:88:87:88 Main Advanced Chipset Boot Security Save & Exit PORT CONFIGURATION MENU Item help ►NIC Configuration Blink LEDs (range 0 -15 seconds) 0 PORT CONFIGURATION INFORMATION UEFI Driver: Intel ® 1GbE DEV 5.1.00 →←...
  • Page 45 Field Name PCI Bus:Device:Function: Default Value [Bus:Device:Function] Comment This field is not selectable. There is no help text associated with it. Field Name Link Status Default Value [Disconnected] Help Link Status Field Name Factory MAC Address: Default Value LAN Device MAC address Comment This field is not selectable.
  • Page 46 2.11.1 NIC Configuration Main Advanced Chipset Boot Security Save & Exit Item help Link Speed [AutoNeg] Wake on LAN [Enabled] →← : Select Screen ↑↓ : Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &...

  • Page 47: Port Configuration Information

    2.12 Intel ® I210 Gigabit Network Connection - 00:22:4D:A7:23:9B Main Advanced Chipset Boot Security Save & Exit PORT CONFIGURATION MENU Item help ►NIC Configuration Blink LEDs (range 0-15 seconds) 0 PORT CONFIGURATION INFORMATION UEFI Driver: Intel ® 1GbE DEV 5.1.00 →←...
  • Page 48 Field Name PCI Bus:Device:Function: Default Value [Bus:Device:Function] Comment This field is not selectable. There is no help text associated with it. Field Name Link Status Default Value [Disconnected] Help Link Status Field Name Factory MAC Address: Default Value LAN Device MAC address Comment This field is not selectable.
  • Page 49 2.12.1 NIC Configuration Main Advanced Chipset Boot Security Save & Exit Item help Link Speed [AutoNeg] Wake on LAN [Enabled] →← : Select Screen ↑↓ : Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &...
  • Page 50 3. Chipset Main Advanced Chipset Boot Security Save & Exit ►PCH-IO Configuration Item help ►System Agent (SA) Configuration →← : Select Screen ↑↓ : Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &...
  • Page 51 3.1 PCH-IO Configuration Main Advanced Chipset Boot Security Save & Exit Item help Wake on LAN [Enabled] DeepSx Power Policies [Disable] Restore AC Power Loss [Power Off] Onboard Audio [Auto] →← : Select Screen Front Panel Audio [Auto] ↑↓ : Select Item Enter: Select +/- : Change Opt F1: General Help...
  • Page 52 Default Value [Auto] Possible Value Auto / High Definition Front Panel / Legacy Front Panel / Disabled Help Automatically or Manually select the type of audio front panel installed.
  • Page 53 3.2 System Agent (SA) Configuration Main Advanced Chipset Boot Security Save & Exit Item help ►Graphics Configuration ►Memory Configuration VT-d [Enabled] →← : Select Screen CPU SA Audio Device [Enabled] ↑↓ : Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values F3: Optimized Defaults...
  • Page 54 3.2.1 Graphics Configuration Main Advanced Chipset Boot Security Save & Exit Graphics Configuration Item help Primary VBIOS Version 2177 Primary Display [Auto] Internal Graphics [Auto] DVMT Pre-Allocated [32M] DVMT Total Gfx Mem [256M] →← : Select Screen ↑↓ : Select Item LVDS Display [Enabled] Enter: Select...
  • Page 55 Default Value [256M] Possible Value 128MB / 256MB / MAX Help Select DVMT5.0 Total Graphic Memory size used by the Internal Graphics Device. Field Name LVDS Display Default Value [Enabled] Possible Value Disabled / Enabled Help Enable / Disable LVDS display. Field Name LVDS Panel Type Default Value...
  • Page 56 3.2.2 Memory Configuration Main Advanced Chipset Boot Security Save & Exit Memory Information Item help Memory Frequency 1333 Mhz Total Memory 16384 MB (DDR3) Memory Voltage 1.50v DIMM 0 8192 MB (DDR3) DIMM 1 8192 MB (DDR3) CAS Latency (tCL) Minimum delay time CAS to RAS (tRCDmin) Row Precharge (tRPmin)
  • Page 57 Default Value Memory in the DIMM. Comment This field is not selectable. There is no help text associated with it. Field Name CAS Latency (tCL) Default Value tCL value Comment This field is not selectable. There is no help text associated with it. Field Name CAS to RAS (tRCDmin) Default Value...
  • Page 59 3.2.2.1 Custom Profile Control Main Advanced Chipset Boot Security Save & Exit Memory Timing Information Item help Memory Frequency 1333 Mhz CAS Latency (tCL) CAS to RAS (tRCDmin) Row Precharge (tRPmin) Active to Precharge (tRASmin) Write Recovery (tWRmin) Refresh Recovery (tRFCmin) Row Active to Row Active (tRRDmin) Write to Read Command (tWTRmin) Read to PrechargeCommand(tRTPmin) 5...
  • Page 60 Field Name CAS to RAS (tRCDmin) Default Value tRCD value Comment This field is not selectable. There is no help text associated with it. Field Name Row Precharge (tRPmin) Default Value tRP value Comment This field is not selectable. There is no help text associated with it. Field Name Active to Precharge (tRASmin) Default Value...
  • Page 61 Possible Value 4 - 18 Help Cas Latency Range 4-18. Field Name tRCD Default Value Possible Value 1 - 38 Help Row to Col Delay Range 1-38. Field Name Default Value Possible Value 1 - 38 Help Ras Precharge Range 1-38. tRAS Field Name Default Value...
  • Page 62 Field Name Default Value [33] Possible Value 1 - 586 Help Min Active to Active/Refresh Delay Time (tRCmin) 1-586. tFAW Field Name Default Value [20] Possible Value 1 - 586 Help Min Four Activate Window Delay Time 1-586. Field Name tCWL value Default Value Possible Value...
  • Page 63 4. Boot Boot mode select = UEFI Main Advanced Chipset Boot Security Save & Exit Boot Configuration Item help Setup Prompt Timeout Bootup NumLock State [On] Quiet Boot [Enabled] Fast Boot [Disabled] Boot mode select [UEFI] FIXED BOOT ORDER Priorities Boot Option #1 [UEFI CD/DVD] Boot Option #2...
  • Page 64 Boot mode select = LEGACY Main Advanced Chipset Boot Security Save & Exit Boot Configuration Item help Setup Prompt Timeout Bootup NumLock State [On] Quiet Boot [Enabled] Fast Boot [Disabled] Boot mode select [Legacy] FIXED BOOT ORDER Priorities Boot Option #1 [CD/DVD] Boot Option #2 [Hard Disk: ST3160..]...
  • Page 65 Boot mode select = DUAL Main Advanced Chipset Boot Security Save & Exit Boot Configuration Item help Setup Prompt Timeout Bootup NumLock State [On] Quiet Boot [Enabled] Fast Boot [Disabled] Boot mode select [DUAL] FIXED BOOT ORDER Priorities Boot Option #1 [UEFI CD/DVD] Boot Option #2 [CD/DVD]...
  • Page 66 F4: Save & Reset ESC: Exit Version 2.15.1326. Copyright (C) 2012 American Megatrends, Inc. Field Name Setup Prompt Timeout Default Value Possible Value 1~65535 Help Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. Field Name Boot NumLock State Default Value [On]...
  • Page 67 Help Sets the system boot order. Field Name Boot Option #3 Default Value [UEFI USB Key] Possible Value UEFI CD/DVD, UEFI Hard Disk, UEFI USB KEY, UEFI Network, UEFI USB CD/DVD,UEFI USB Hard Disk, Disabled. Help Sets the system boot order. Boot Option #4 Field Name Default Value...
  • Page 68 Help Sets the system boor order. Field Name Boot Option #4 Default Value [Network] Possible Value CD/DVD, Hard Disk, USB KEY, Network, USB CD/DVD, USB Hard Disk, USB Floppy, Disabled. Help Sets the system boot order. Boot Option #5 Field Name Default Value [USB CD/DVD] Possible Value...
  • Page 69 Default Value [UEFI Hard Disk] Possible Value UEFI CD/DVD, CD/DVD, UEFI Hard Disk, Hard Disk, UEFI USB Key, USB Key, UEFI Network, Network, UEFI USB CD/DVD, USB CD/DVD, UEFI USB Hard Disk, USB Hard Disk, USB Floppy, Disabled. Help Sets the system boot order. Field Name Boot Option #4 Default Value...
  • Page 70 USB Hard Disk, USB Floppy, Disabled. Help Sets the system boot order. Field Name Boot Option #9 Default Value [UEFI USB CD/DVD] Possible Value UEFI CD/DVD, CD/DVD, UEFI Hard Disk, Hard Disk, UEFI USB Key, USB Key, UEFI Network, Network, UEFI USB CD/DVD, USB CD/DVD, UEFI USB Hard Disk, USB Hard Disk, USB Floppy, Disabled.
  • Page 71 Help Sets the system boot order. BOOT Option Priorities Field Name Boot Option #1 / Boot Option #2 / … Default Value [Boot device name] Possible Value All Boot devices name. Help Sets the system boot order. Hard Drive BBS Priorities Field Name Help Sets the order of the legacy devices in this group.
  • Page 72 NETWORK Drives. Comment Press Enter when selected to go into the associated Sub-Menu. Field Name USB CD/DVD ROM Drive BBS Priorities Help Specifies the Boot Device Priority sequence from available USB CD/DVD ROM Drives. Comment Press Enter when selected to go into the associated Sub-Menu. USB Hard Disk Drive BBS Priorities Field Name Help...
  • Page 73 Field Name UEFI USB Hard Disk Drive BBS Priorities Help Specifies the Boot Device Priority sequence from available UEFI USB Hard Disk Drives. Comment Press Enter when selected to go into the associated Sub-Menu. Field Name UEFI USB KEY Drive BBS Priorities Help Specifies the Boot Device Priority sequence from available UEFI USB Key Drives.
  • Page 74 4.1 CSM parameters Main Advanced Chipset Boot Security Save & Exit Item help Launch CSM [Enabled] Launch PXE OpROM policy [Do not launch] →← : Select Screen ↑↓ : Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &...
  • Page 75 5. Security Main Advanced Chipset Boot Security Save & Exit Password Description Item help If Only the Administrator's password is set then this only limits access to Setup and is only asked for when entering Setup If ONLY the User’s password is set, then this Is a power on password and must be entered to boot or enter Setup.
  • Page 76 Help Set HDD password Comment Press Enter when selected to go into the associated Sub-Menu.
  • Page 77 5.1 Secure Boot menu Main Advanced Chipset Boot Security Save & Exit Item help System Mode Setup Secure Boot Not Active Secure Boot Support [Enabled] Secure Boot Mode [Standard] ►Key Management →← : Select Screen ↑↓ : Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values...
  • Page 78 5.1.1 Key Management Main Advanced Chipset Boot Security Save & Exit Factory Default Key Provisioning [Disabled] Item help ►Install All Factory Default Keys ►Save All Secure Boot Variables Platform Key (PK) NOT INSTALLED ►Delete PK ►Set new PK →← : Select Screen Key Exchange Key Database (KEK) NOT INSTALLED ↑↓...
  • Page 79 Field Name Save All Secure Boot Variables Help Store content of each Secure Boot Variable(data formatted as EFI_SIGNATURE_LIST) to a file with matching name on selected file system’s root folder Comment Field Name Delete PK Help Delete the Variable from NVRAM. Removing PK will reset System to Setup Mode Comment Set new PK...
  • Page 80 Comment Field Name Set new DB Help Insert Factory Default Keys or load from a file formatted as: 1. Public Key Certificate in : a) EFI_SIGNATURE_LIST, b) EFI_CERT_X509 (DER encoded), c) EFI_CERT_RSA2048 (bin), d) EFI_CERT_SHA256 (bin). 2. Efi Time-Based Authenticated Variable Comment Field Name Append DB...

  • Page 81: Hdd Password Configuration

    5.2 HDD Security Configuration Main Advanced Chipset Boot Security Save & Exit HDD Password Description Item help Allow Access to Set, Modify and Clear Hard Disk User Password. User Password need to be installed for Enabling Security. HDD PASSWORD CONFIGURATION: Security →←...
  • Page 82 6. Save & Exit Main Advanced Chipset Boot Security Save & Exit Save Changes and Reset Item help Discard Changes and Reset Discard Changes and Exit Restore Defaults Save as User Defaults Restore User Defaults Boot Override →← : Select Screen ↑↓...
  • Page 83 Help Save the changes done so far as User Defaults. Comment Field Name Restore User Defaults Help Restore the User Defaults to all the setup options. Comment...

Table of Contents