Specifications - Sony CMT-CPX11 Operating Instructions Manual

Sony operating instructions micro hi-fi component system cmt-cpx11
Table of Contents

Advertisement

Specifications

Main Unit
Amplifier section
For the United States model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 4-ohm loads, both channels driven, from
120 – 10,000 Hz: rated 75 watts per channel
minimum RMS power, with no more than 10%
total harmonic distortion from 250 milliwatts to
rated output.
North American model:
Continuous RMS power output (reference):
Total harmonic distortion less than 0.9% (4 ohms at
1 kHz, 35 W)
European model:
DIN power output (rated): 55 + 55 W
Continuous RMS power output (reference):
Other models:
The following measured at 220 – 240 V AC, 50/60 Hz
DIN power output (rated): 55 + 55 W
Continuous RMS power output (reference):
Inputs
MD/VIDEO IN (phono jacks):
Outputs
CD DIGITAL OUT:
PHONES:
SPEAKER:
GB
30
75 + 75 W
(4 ohms at 1 kHz, 10%
THD)
(4 ohms at 1 kHz, DIN)
75 + 75 W
(4 ohms at 1 kHz, 10%
THD)
(4 ohms at 1 kHz, DIN)
75 + 75 W
(4 ohms at 1 kHz, 10%
THD)
Sensitivity 450/250 mV,
impedance 47 kilohms
Optical Wavelength:
660 nm
accepts headphones with
an impedance of 8 ohms or
more
accepts impedance of
4 ohms
CD player section
Laser
Frequency response
Wavelength
Tape deck section
Recording system
Frequency response
Wow and flutter
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
North American model:
Other models:
Antenna
Antenna terminals
Intermediate frequency
AM tuner section
Tuning range
Pan-American model:
European model:
Other models:
Antenna
Intermediate frequency
Speaker
Speaker system
Speaker units
Woofer:
Tweeter:
Nominal impedance
Semiconductor laser
(CD: =780 nm)
Emission duration:
continuous
CD: 2 Hz – 20 kHz
780 – 790 nm
4-track 2-channel stereo
50 – 13,000 Hz (±3 dB),
using Sony TYPE I
cassettes
±0.15% W. Peak (IEC)
0.1% W. RMS (NAB)
±0.2% W. Peak (DIN)
87.5 – 108.0 MHz
(100 kHz step)
87.5 – 108.0 MHz (50 kHz
step)
FM wire antenna
75 ohms unbalanced
10.7 MHz
530 – 1,710 kHz
(with the tuning interval
set at 10 kHz)
531 – 1,602 kHz
(with the tuning interval
set at 9 kHz)
530 – 1,710 kHz
(with the tuning interval
set at 10 kHz)
531 – 1,602 kHz
(with the tuning interval
set at 9 kHz)
AM loop antenna, external
antenna terminal
450 kHz
2-way, bass-reflex type
13 cm dia., cone type
2.5 cm dia., Balanced-
Dome-type
4 ohms
continued

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents